What is the height of the factory of the pure clean ice cube machine? 4 factors to pay attention to

What is the height of the factory of the pure clean ice cube machine? This is the question that most customers ask when contacting the ICE COOL ice maker. To provide more complete information about the need for investment in a pure clean ice factory and the preparation of an ice machine factory, ICE COOL ice machine shares with you the following article.

Why is the factory height of the pure clean ice cube machine important?

The ice cube factory has the same purpose as other factories, which is to serve to shield the wind and rain and to place the production equipment in the pure ice production line directly such as water filtration. , cold storage, ice storage tanks or auxiliary works such as offices, accommodation and toilets.

However, with a pure clean ice machine factory, it is necessary to pay attention to the height factor because with the ICE COOL ice machine, the installation area is usually not large, but the machine has a higher height than other production equipment. In other normal production and especially during the use of the ice machine, inspection, cleaning, maintenance or adjustment work needs to be observed for the equipment placed overhead.

On the ice tower or stone mortar, there is a part located at the top that helps keep cold water pumped up and distributes water evenly to separate water to provide ice in the ice cube mortar. In addition, on the top of the ice cube mold, there is a float valve to send the complete ice-making signal to the central PLC control unit.

Works related to pure ice cube factory

During operation, the operator of the ICE COOL ice machine needs to have operations and work related to the ice machine factory such as:

• Check and adjust the water level on the ice cube mortar.
• Check and adjust the water float valve.
• Sanitize the water whiskers that divide the water into ice.

These jobs require the operator to go up on the stone tower and look inside the top of the stone mortar. In case the height of the ice cube factory is not guaranteed, it will not be able to be observed or interfere with the above activities.

What is the height of the factory of the pure clean ice cube machine?

The height of the workshop is usually 500mm to 1 meter higher than the height of the mineral stone machine. Usually in factories, the height of the workshop is as follows:

• For an ice-making factory that uses a machine with a capacity of 10 tons or less with a 2-meter-long stone tower, the height of the workshop is 5 meters or more.
• For an ice-making factory that uses a machine with a capacity of 15 tons or more with a 3-meter-long stone tower, the height of the workshop is 6 meters or more.

To ensure that the height of the ice cube factory is suitable for long-term investment, it is possible to invest in a workshop with a height of 6 meters.

In case, you already have a factory but the height is not guaranteed, there is still a plan to renovate. You just need to edit the area with the ice tower with an area of ​​​​2 x 2 meters with a height of 6m as above. Thus, it is possible to ensure the area and space to install the ICE COOL ice machine.

What should be paid attention to when investing in a pure clean ice cube factory?

ICE COOL ice machine provides the best free consulting services for investors:

• Choosing the right pure ice cube machine capacity
• Arrange equipment and make 3D factory model to understand the installation location and plant operation plan.
• Build the factory according to the instructions of the ice machine company ICE COOL so as not to be generated.

Thank you for your interest in the article about the ice machine factory, hope that the information shared about the ice machine ICE COOL will help you more in learning and investing in the current ice factory. . Any need for advice, please contact the ice maker  ICE COOL immediately according to the information above.